Small milling machine inserts are available in various types based on the number of teeth, including 5-tooth, 6-tooth, 8-tooth, 12-tooth, 16-tooth, and integral carbide inserts. The inner bore diameter is determined by the milling machine's cutter shaft diameter, typically 4-6mm larger to ensure adequate clearance after installation.
Based on the shape of the carbide cutting head, they are mainly divided into cylindrical pointed teeth and square teeth. Cylindrical pointed carbide inserts are primarily used for deep milling and roughening of concrete pavements, highway bridge decks, epoxy resin surfaces, and asphalt pavements, achieving greater milling depths and producing a rougher surface. Square wide-tooth milling inserts are suitable for shallow milling of concrete and asphalt pavements, often used for removing traffic markings and hot-melt painted surfaces, resulting in a smoother surface.
For asphalt pavements, which are highly viscous and have a soft texture, wide-tooth carbide-tipped asphalt-specific milling machine inserts are better suited for block cutting and are ideal for milling and roughening pretreatment of asphalt pavements.
The cutter shaft should be inspected daily. If the wear groove depth exceeds 25% of the shaft diameter, it must be replaced. Its lifespan is approximately half that of a tungsten carbide end mill, and based on a milling depth of 5mm, its lifespan is approximately 350-500 square meters. A milling drum, when properly maintained, can typically be used for about 3 months.
Tooling technology continues to evolve to improve performance and efficiency. For example, some manufacturers optimize carbide tip and wear-resistant shim design to enhance tool durability and work efficiency. Other technologies extend the lifespan of related components by optimizing tip shape to reduce milling resistance and improving shim design to enhance cutter head rotation performance.




