May 09, 2026 Leave a message

Performance characteristics and comparison of dry dust collectors

Dry dust collectors are a general term encompassing inertial dust collectors, filter dust collectors, and dry electrostatic precipitators, which do not use liquids (water) to capture dust from dust-laden gases. They account for over 90% of all dust collection systems.

 

The advantages of dry dust collectors include a wide range of applications; they can be used for most types of dust, especially for large-scale centralized dust collection systems. The dust discharged is in a dry powder state, which is beneficial for centralized treatment and comprehensive utilization. Their disadvantages include the inability to remove toxic or harmful components from the gas, the potential for secondary dust generation if not handled properly, and the need for anti-condensation measures when handling dust-laden gases with high relative humidity or high temperatures, otherwise dust adhesion and pipe blockage may occur.

 

Compared to wet scrubbers that require water as a medium, dry scrubbers offer the following advantages: They provide more efficient dust handling than traditional wet scrubbers, eliminating the need for water and thus saving water and avoiding secondary pollution risks; dust removal efficiency is improved compared to traditional wet scrubbers; maintenance costs are significantly reduced, and filter cartridge replacement cycles are greatly extended; and the risk of icing in the spray system is eliminated, allowing for a wider applicable temperature range.

 

Dry scrubbers include various types such as bag filters and cartridge filters. For the same filtration area, cartridge filters are smaller, while bag filters are twice the length, width, and height. Ordinary cartridge filters cost approximately 30% to 50% more than ordinary bag filters. Bag filters are mostly installed from top to bottom, requiring maintenance and replacement to be done by climbing to the top of the dust collector to remove the top plate, electromagnetic pulse assembly, and frame, which is very inconvenient, causes heavy dust pollution on-site, and requires work at height.

 

Some high-efficiency dry dust removal equipment has a dust removal efficiency of up to 99.5%, and a filtration efficiency of over 99.9% for fine dust (1~2um).

Send Inquiry

whatsapp

Phone

E-mail

Inquiry