A milling machine mainly consists of an engine, a milling rotor (milling drum), a material conveying system, a travel system, and a control system.
The milling cutter teeth, as the milling actuators of the milling machine, primarily fail through wear. The structural design of the cutter teeth (such as the assembly method with the tool holder) significantly impacts performance.
The influence of the horizontal feed rate, milling drum speed, and the angle at which the cutter teeth are installed on milling resistance is investigated.
Modern milling machine designs must adhere to stringent safety standards (such as EN 500-2), including specific protection for the milling rotor area, safe design of the conveying system, special requirements for the water spray system, and optimization of the operator's field of vision. Furthermore, the machine can be equipped with different types of milling rotors (such as ECO high-efficiency or precision milling rotors) to adapt to various working conditions, with working widths ranging from 35 cm to 4.40 m and maximum milling depths reaching 35 cm.
Taking the Weifute LXD120 asphalt pavement milling machine as an example, its technical parameters include: milling width 1250mm, milling depth 0-300mm, rated power 225KW, and travel speed 0-5km/h. The milling machine mainly consists of an engine, milling rotor (milling drum), material conveying system, travel system, and control system.
The milling machine's cutting teeth, as the milling execution component, primarily fail due to wear. The structural design of the cutting teeth (such as the assembly method with the tool holder) has a significant impact on performance.
The influence of the milling machine's horizontal feed speed, milling drum speed, and the angle at which the cutting teeth are installed on milling resistance is investigated.
Modern milling machines are designed to adhere to stringent safety standards (such as EN 500-2), including specific protection for the milling rotor area, safe design of the conveying system, special requirements for the water spraying system, and optimized operator visibility. Furthermore, the machines can be equipped with different types of milling rotors (such as ECO high-efficiency or precision milling rotors) to adapt to various working conditions, with working widths ranging from 35 cm to 4.40 m and maximum milling depths up to 35 cm.
Taking the Weifute LXD120 asphalt pavement milling machine as an example, its technical parameters include: milling width 1250 mm, milling depth 0-300 mm, rated power 225 KW, and travel speed 0-5 km/h.
